Tile Trims

A good rule of thumb when it comes to choosing the right size tile trim is to choose a tile trim that’s one size up from the thickness of your chosen tile. This is to allow for the adhesive layer you also have to apply for the tiles to stick. 

You should allow for around 1mm to 2.5mm for your adhesive. So if your tile thickness is 10mm, opt for a tile trim that measures 12.5mm (or the closest equivalent) to ensure you have enough space for everything and you achieve a professional finish that you’re happy with.

Cutting tile trim to size doesn’t have to be a difficult or time consuming job. You just need to make sure you have all the tools you’ll need and follow these instructions step by step. 

Tools You’ll Need:

• A Tape Measure & Pencil
• A Fine Toothed Hacksaw or Angle Grinder
• Mitre Box
• Metal File
• PPE (Safety Glasses & Gloves)

Step By Step Guide

1. Measure & Mark Up: First of all, you’ll want to use your tape measure to measure the length of the trim required and mark your cutting point with the pencil precisely.
2. Secure The Trim: You’ll want to clamp the trim securely in a workbench or mitre box to ensure you cut the trim in a straight line. 
3. Cut The Trim: If using a hacksaw, ensure you use steady, controlled strokes when cutting and be sure to line the trim up with the cut slots on your mitre box to make the process easier.
   
   If using a power tool such as an angle grinder, ensure you use the most suitable blade for the task of cutting tile trim and cut slowly and steadily to ensure precision.
4. Deburr The Edges: With the tile trim cut, you’ll want to smoothen out any rough edges by using a metal file to rub any sharp edges until they’re clean and smooth. 

Now your tile trim piece should be cut to size and ready to install. But just be sure to test it before going ahead and installing it with the adhesive.

Before you fit your tile trim, you may need to follow our instructions above for cutting your tile trim to size. However if that’s not the case or you’ve already done so, let’s take a look at the process of fitting tile trim. 

1. Apply Adhesive: First of all, apply your adhesive to the wall or floor area where your tiles and trim will go. We recommend using a notched trowel to ensure even coverage.
2. Place Tile Trim: Then press the trim firmly into the adhesive where you want the trim to be positioned. 
3. Wipe Away Excess: Use a damp cloth or scraper to wipe away any extra adhesive that squeezes out from behind the tile trim.
4. Place Tiles: Line your tiles up with the trim and place each tile in line with the trim, being sure to apply adhesive to the back of each tile before laying and ensuring there’s a 2-3mm gap between the tile and trim to allow for grout or silicone application. 
5. Use Tape (Optional): If you feel like it’s required, you can use tape to hold the trim in place whilst the adhesive dries.