Tile Wedges

After you understand the process of how to use tile wedges, the process is really straightforward. Essentially, the tile wedges and clips are a two-part system. The clip sits underneath adjacent tiles and the wedge is inserted in to make the tiles level. Let’s break down the key steps on how to use the tile wedges: 

1. Prepare The Area: The first step is to ensure that the surface area in which you’re tiling is clean and free of any debris and dust. Make sure that the area is dry before you start - this will help the installation to be a smoother process, avoiding any dirt getting trapped or preventing the adhesive from drying properly.   
2. Apply Adhesive & Set The First Tile: Apply the appropriate adhesive, in accordance with its instructions and compatibility. Set down the first tile on the floor or wall, and press it down firmly to set the height. 
3. Insert The Clips Under The Tile: Slide in the clips so they’re facing upwards (this will help in the removal process). For standard tiles, use two clips per side underneath the tile that you just laid. 
4. Set The Next Adjacent Tile: Set down the adjacent tile so that the flat base of the clip is now also under this tile. You’ll see the white loop sticking out between the two tiles, where the grout will be. 
5. Slide The Wedge Into The Clips: The next step is to slide the wedge into the clips. Ensure that you adjust the tile so you’re happy with their consistency and alignment. 
6. Tighten The Wedge With The Pliers: Once you’ve inserted the wedge, tighten it with some pliers to make sure it’s nice and secure. 
7. Clean Any Excess Glue From The Clip: We recommend cleaning any excessive adhesives from the clip when it’s still wet. If there’s still some adhesive on the clips, it can stop them from snapping off smoothly and plastic bits can get trapped in the grout. For a wonderful smooth finish, ensure everything’s cleaned up! 
8. Remove The Clips & Wedges: Wait at least 24 hours for the adhesive to fully dry. Use a rubber mallet to snap off the clips, but gently to ensure you don’t damage or mark your tiles. If everything has worked and the adhesive is fully dry, they should snap off and the wedges will be removed with them. 
9. Recycle & Reuse The Wedges: Once you have removed the tile wedges, they can be cleaned and reused again for future projects. They’re recyclable tools that are handy for professional tilers who have a lot of projects on the go.

Unfortunately, when tiles are not installed correctly, lippage can lead to a number of different risks. Let’s take a look at some of the main risks, as they’re pretty important things to bear in mind when you begin installing your new tile project. 

1. Further Damage To Building’s Structure: Old tiles, or tiles that haven’t been installed correctly, can lead to other issues and damage other parts of a building structure. It can lead to leakages, mould, water pooling and cracked grout.
2. Can Be Hazardous: Tiles with severe lippage can actually be quite dangerous. With sharp edges and uneven surfaces, lippage can be an accident risk if not careful. 
3. Expensive To Fix: Harsh lippage is neither easy nor cheap to fix. Ensuring that tiles are correctly installed to begin with can save you a lot of money in the long-run. 
4. Decreased Property Value: Excessive lippage can ruin the aesthetics of your home and be a red-flag to viewers during home inspections - potentially resulting in the decrease of your home’s value. 

These risks highlight the importance of ensuring that your tiles are installed correctly with the use of various tools, including tile wedges